How to maintain tray sealing machine

Overview:

 

Tray Sealing Machine has the functions of sealing and vacuum. It adopts intelligent temperature controller and strong sealing function. It uses JAPANESE OMRON PLC. Fuselage of Stainless steel is up to food standard. The usage of pneumatic parts simplifies the mechanical structure., decrease the breakdown. The performance of the machine is more stable and safe. The machine is suitable for using roll of plastic film and aluminium film, it is widely used in beverage, milk and food industries.

 

Maintaining

 

1. Check the air source pressure before running, the average air pressure should be 0.6-0.75Mpa. To ensure the good working of the cylinder, drain the waste water in the filter regularly. Oil the drive cylinder regularly to prevent spare parts breakdown and longer the machine life.

2. After working, let the heating part cool on room temperature. Clean the sealing part with hot water and drain the water. Clean the aluminum board to prevent corrosion and aging.

3. Check the sealing rings if it is clean to perfect the sealing effect.

4. Connect the machine earth wire properly to safe using.

5. Set the sealing temperature from low to high to insure the sealing temperature more even and better sealing effect.

6. Stop the machine immediately when breakdown happens, the whole machine is on reset condition, shut down the power and check the breakdowns. After fixing, restart the machine.